Has anyone had luck finding a replacement cap and rotor at the local part house for a Firecore distributor? I had a spare from my old distributor, but the cap didn't fit right on the Firecore and the rotor was 180* out. Mancini Racing has one, but I've repeatedly tried emailing to see if they sell a black cap like I received when I bought the distributor... no answer. Anyway, any luck out there? I need a cap with female connectors. Below is the Mancini link.
https://www.manciniracing.com/fivaaddicapr.html
https://www.napaonline.com/en/p/ECHMO20?partTypeName=Distributor+Cap&keywordInput=distributor+cap
https://www.napaonline.com/en/p/ECHMO3000?partTypeName=Distributor+Rotor&keywordInput=distributor+cap
I use these Napa parts on my Firecore 383 Vacuum Advance Dist
Since day 1
Never even used the Cap and Rotor that was sent in the box
Thank you much! I'll check it out.
I used a restoration cap from Mopar Performance on my Firecore with no issues.
https://www.summitracing.com/parts/dcc-p4529791?seid=srese1&gclid=CjwKCAjw2dD7BRASEiwAWCtCb6haH8Ih_vyKjnCAHnb8abRrj0hGQKxhQ3J6oeXcjcGIfHKBRuo-qRoCRmgQAvD_BwE (https://www.summitracing.com/parts/dcc-p4529791?seid=srese1&gclid=CjwKCAjw2dD7BRASEiwAWCtCb6haH8Ih_vyKjnCAHnb8abRrj0hGQKxhQ3J6oeXcjcGIfHKBRuo-qRoCRmgQAvD_BwE)
Please excuse my changing the subject a little.
The coil to Distributor wire I received with my Firecore 50 spark plug wire set is too shore.
Do you know where I can get a longer one.
Ron hasn't responded to my question.
Thank You
Solved
I contacted FireCore directly. It is in the mail!