Text only | Text with Images

DodgeCharger.com Forum

Classifieds => Online Swap Meet => Parts & Accessories For Sale => Topic started by: 40Windsor on August 15, 2020, 02:17:24 AM

Title: Richmond 4.56 R&P for 742 in western OR.
Post by: 40Windsor on August 15, 2020, 02:17:24 AM
Richmond Gear 69-0047-1 Ring and pinion for Chrysler 8.75" (742 Housing)
4.56 Ratio
10 Spline Pinion.

New, put my yoke on the pinion to check fit, other than that, it has been sitting in the box.

Located in Myrtle Creek Oregon.
You can contact me direct at christopher.hare2@yahoo.com

$150

I also have an open carrier that I would suggest new spider gears for. Bearing cages are gone but collars need to be pulled off the hubs. Late carrier with larger hubs. Not sure it is worth shipping. But if you pay, I'll ship it for cost plus $1 (to buy an Abba Zabba for my time to hunt for a box). Otherwise, free.
Title: Re: Richmond 4.56 R&P for 742
Post by: 40Windsor on August 15, 2020, 02:19:55 AM
(https://images.craigslist.org/01111_cORYcfWMD2e_0lM0t2_600x450.jpg)
Title: Re: Richmond 4.56 R&P for 742 in western OR.
Post by: 40Windsor on August 22, 2020, 07:26:08 PM
.
Title: Re: Richmond 4.56 R&P for 742 in western OR.
Post by: 40Windsor on September 07, 2020, 02:33:57 AM
.
Title: Re: Richmond 4.56 R&P for 742 in western OR.
Post by: 40Windsor on September 07, 2020, 10:48:48 PM
Setup bearings no longer available. Price drop to $150 for the R&P with the remainder of shims. Willing to ship, buyer pays actual shipping cost.
Title: Re: Richmond 4.56 R&P for 742 in western OR.
Post by: 40Windsor on October 10, 2020, 12:19:30 PM
Found something I want to buy. $100 picked up, will ship if buyer pays shipping.
Text only | Text with Images