69 Charger Gas cap and trim ring gasket. I can't find this item anywhere, I did email a place suggested any ideas otherwise? Without this gasket the trim ring would be on your paint. :'( I even called Year One, no such animal.
If you buy the complete body gasket kit, it will be in the kit. I have not seen them sold separately
This it? :shruggy:
http://www.paddockparts.com/Paddock/product_family.asp?family%5Fid=12202&gift=False&0=dept%2Easp%2Cdept%5Fid%3D4%26menu%5Fid%3D%26Tree%3D%2CDodge%2FPlymouth&1=dept%2Easp%2Cdept%5Fid%3D60%26menu%5Fid%3D%26Tree%3D0%2CDodge%2FPlymouth%20Fuel&mscssid=11B6058C1BD74C369A42EFEDF560A6E3
Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Quote from: Hemidog on May 06, 2009, 02:40:38 AM
Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ahhhh that's the place Chris ( mod ) suggested. I wrote them an email, and now I know the answer. Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?
Quote from: 1969chargerrtse on May 06, 2009, 04:45:58 AM
Quote from: Hemidog on May 06, 2009, 02:40:38 AM
Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ahhhh that's the place Chris ( mod ) suggested. I wrote them an email, and now I know the answer. Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?
read the auction under the "materials" section
PS---your searching skillz suck! :slap: :nana:
When I went to put mine on it made the trim ring / base sit too high so I ended up throwing it in the garbage. I used a layer of masking tape on QTR.