Print Page - Metal protection spray from rust.

Title: Metal protection spray from rust.
Post by: 1970Moparmann on May 31, 2010, 09:00:33 PM

I may have had a dream about this a while ago but I thought I read here about a Napa metal clear protection spray that you can put on bolts and bar metal to protect from rust? Is there a such animal - been searching for an hour on Napa and google for something.

Thanks! :2thumbs:

Title: Re: Metal protection spray from rust.
Post by: elitecustombody on May 31, 2010, 09:19:13 PM

I use Purple Power De-Ruster Metal Conditioner/Rust Preventer on my fresh 4x10 sheets of cold rolled steel, it works pretty good, for finished parts and welds I use Picklex20, but the Purple Power stuff does it's job well, if you don't want to spend $140 a gallon for Picklex

Title: Re: Metal protection spray from rust.
Post by: bull on May 31, 2010, 10:44:50 PM

Don't most bolts come zinc plated already?

Title: Re: Metal protection spray from rust.
Post by: 1970Moparmann on June 01, 2010, 07:13:10 AM

I was working on my sisters Charger yesterday and was under the car for hours. Basically, all the bolts on the under carriage looked like hell. That made me think about that previous post that I thought I saw.

I'll check out The Purple Power! Thanks. :2thumbs:

Title: Re: Metal protection spray from rust.
Post by: ChargerST on June 01, 2010, 04:59:09 PM

I used Evaporust to derust my bolts (they were fairly clean and rust free to begin with) and then had them zinc plated in black. Looks really nice, is not expensive and prevents rust! :2thumbs:

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: 1970Moparmann on May 31, 2010, 09:00:33 PM