By chance does anyone have a diagram for where exactly to drill the holes on a '69 tail light panel for the R/T badge? Thank you! :cheers:
I don't have a diagram, but what can be done is make a template. Put emblems pins thru card stock or heavy paper, trace the outline of emblem. Line it up on the panel, mark the holes and drill away. Might be good idea to weld up the other three holes first.
ill take measurements for you today
measure from top of tailpanel with top trim removed
left hole is 4 15/16" to center of hole
right hole is 5 1/4" to center
measure from tailight opening to center of hole
left hole is 2 9/16
right hole is 2 1/2
hope this helps
Thanks Ryan, much appreciated!!