Here is a "How To" on restoring your '68 Charger front seats..
Picture 1: Order new seat covers and seat foam from A1 Canvas.
Picture 2: Take the bolts out that hold the upper seats to the lower seat.
Picture 3: The square nut on the back came loose so i had to get in there with a vise grips to hold it while i turned the bolt out. This nut will get welded back on.
Picture 4: Take the hog rings off the old crusty seat covers and discard. What a mess! :icon_smile_blackeye:
I'm going to bed now. Follow along tomorrow night for phase two.
Paul
in St. Paul
Looks like a great time Paul! Take you're time and it will come out cherry! :2thumbs:
interesting, keep us posted
Ill be doing this in a few weeks, thanks for the how-to!
So this morning I took the 68 for a drive down to my friends house out in the country so i could use his sand blaster to clean up my seat frames. They were a little rusty so i wanted to clean them up and make them look nice. So i was sandblasting away and looked up and my car was gone. My friend was mowing his lawn while i was blasting and i had parked my 68 on part of his lawn and in order for him to mow that area he had to move my car, which involved a trip around the block i guess.. hahaha :drive:
So, as of tonight, i have the seat frames cleaned up and painted, the new Legendary Foam on, and the PUI Interiors new seat covers on. It was pretty easy and i'm ready to install the seats tomorrow after i get new bolts for the seat frames.
Paul
in St. Paul
Damn i got nothing on this guy!
http://www.geocities.com/robertmitchell32000/seatrepair/index.html
I thought the seats in my Coronet were in bad shape but I believe the seats from your Charger were worse. I'm now working on a 68 Charger for my son.
http://geocities.com/robertmitchell32000/CHARGER/TheMitchells68Charger.html
The seats from the Charger are in sad shape. It appears I get the joy of doing all this again.
RHM, Jr.
Do you know where the A-B seam is on the FST?
Or where the 2x5 muslim strip goes?
When I read the directions I see the A-B seam being on each side where the sides fold over and tuck in, but if that were true Id need both 2x5 strips for just one seat.
I have enough scrap to muslim to cut more but it seems like I shouldn't have to.