Print Page - 1968 charger a/c brackets

Title: 1968 charger a/c brackets
Post by: thebigmope on January 19, 2024, 03:23:37 PM

Does anyone have a 1968 charger 440 with factory a/c that could provide pictures of the brackets on the back of the compressor and how they are hooked up TIA, John

Title: Re: 1968 charger a/c brackets
Post by: John_Kunkel on January 20, 2024, 03:16:41 PM

I believe '68 was the last year for the cast rear compressor bracket, later years had stamped steel brackets.CompBracket.jpg

Title: Re: 1968 charger a/c brackets
Post by: thebigmope on January 28, 2024, 05:10:58 PM

ok thank you i was just wondering if there are steel ones besides that cast iron one

Title: Re: 1968 charger a/c brackets
Post by: John_Kunkel on January 28, 2024, 06:32:32 PM

IIRC, there is a stamped steel front bracket and a couple of tubing stabilizers from the compressor heads to the intake manifold.

Title: Re: 1968 charger a/c brackets
Post by: thebigmope on January 29, 2024, 10:17:50 AM

would you have a picture ?

Title: Re: 1968 charger a/c brackets
Post by: thebigmope on January 29, 2024, 10:22:53 AM

The tubing stabilizers are the ones i am looking for pictures if anyone has

Title: Re: 1968 charger a/c brackets
Post by: John_Kunkel on January 29, 2024, 01:19:14 PM

Well, according to this E-bay ad, the top stabilizer is stamped, not tubing. :shruggy:

https://www.ebay.com/itm/134741407021

Title: Re: 1968 charger a/c brackets
Post by: thebigmope on January 30, 2024, 02:14:30 PM

Thank you for your help i will look into this

DodgeCharger.com Forum

Mopar Garage => General Q&A => Topic started by: thebigmope on January 19, 2024, 03:23:37 PM