511" stroker kit (440 block) with 10.7:1 compression
4.375 bore, 4.25 stroke
Eagle crankshaft
Diamond 13cc dished pistons
custom Comp Cam 245/257@110 .535/.542 lift with 1.5 Comp Cams Pro Magnum Rockers
Mopar aluminum straight plug design heads (Edelbrock Performer RPM's) with stage I port job by Porter Racing
flowing 280cfm @.600 lift
MSD ignition
Quick Fuel 850 cfm carb with 1/2" spacer
Holley Street Dominator intake
Melling oil pump
Milodon high volume water pump
Mlodon 7qt oil pan
ARP accessories
The build made 10 inches of vacuum @ idle (900rpm)
Using 93 octane...
Horsepower: 609hp @5400 rpm
Torque: 688 @4200 rpm
Can't wait to get it in the car! :o
:coolgleamA: :popcrn:
Very nice Justen ! :2thumbs:
That's gonna be an absolute blast in the car !! :icon_smile_big:
Here are the dyno results & engine pic....impressive :yesnod:
Ron
Ron, thanks for posting and your recommendations! Justen
Nice. :2thumbs:
i now feel inadequate.
Nice, is that going into the Charger in your avatar pic?
Quote from: dstryr on August 06, 2012, 10:44:49 AM
Nice, is that going into the Charger in your avatar pic?
Yes, am installing the motor in the next week or two. Can't wait!
653 foot pounds at 35 hundred :drool5: :yesnod:
Flat Tappet Cam ?
Nice numbers !
Quote from: Challenger340 on August 06, 2012, 10:45:13 PM
Flat Tappet Cam ?
Nice numbers !
Yes, flat tappet cam...and thanks