Print Page - a couple measurements

Title: a couple measurements
Post by: 1charger69 on August 07, 2009, 04:10:44 PM

can anyone please tell me the size hole(s) and location(s) measurements for the vent tube hole next to the filler tube and also the size hole and location for the guage wire that comes through the trunk from the tank...thank you :2thumbs:

Title: Re: a couple measurements
Post by: carolina charger on August 09, 2009, 05:40:33 PM

I cut mine out last week, I'll check to be 100% sure, but I believe I used a 1/2" bi-metal hole saw for the vent grommet.

Title: Re: a couple measurements
Post by: 1charger69 on August 11, 2009, 08:36:49 PM

thanks.....now all i need now the placement of the holes :yesnod:

Title: Re: a couple measurements
Post by: 1charger69 on August 13, 2009, 09:50:08 AM

bump

Title: Re: a couple measurements
Post by: carolina charger on August 15, 2009, 11:02:05 AM

Theres a picture that might help.

http://cgi.ebay.com/ebaymotors/1969-Dodge-Charger-Southern-Project-Car_W0QQitemZ250481747424QQcmdZViewItemQQptZUS_Cars_Trucks?hash=item3a51e025e0&_trksid=p4506.c0.m245#v4-36

Title: Re: a couple measurements
Post by: 1charger69 on October 03, 2009, 03:05:22 PM

anyone come up with this???

Title: Re: a couple measurements
Post by: b5blue on October 03, 2009, 05:51:43 PM

Do a search I think this was covered. :scratchchin:

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: 1charger69 on August 07, 2009, 04:10:44 PM