My Hemi Daytona: Parts, Pieces, and Chunks...

[Daytona R/T SE]

 

[Daytona R/T SE]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

[A383Wing]

works pretty good on glass, chrome, and upholstery as well...just sayin'   

[Daytona R/T SE]

works pretty good on glass, chrome, and upholstery as well...just sayin'   

I'm gonna save a little for the AM/8 track.

[RTDaddy]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

Hope you get more than one spray out of the nozzle before it stops up.  I didn't have too good a luck with mine.

"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."

[Daytona R/T SE]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

Hope you get more than one spray out of the nozzle before it stops up.  I didn't have too good a luck with mine.

"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."

So...

That's why they sent extra nozzles...

At $25 a can, and a month's wait to get it, this stuff had better be awesome.

[JB400]

Didn't you have some paint left over that you could have used in an airbrush?

[Daytona R/T SE]

Didn't you have some paint left over that you could have used in an airbrush?

Yeah, sure.

I could do that...

I'll just mix up a little batch every time I want to paint one bolt.

What a pain in the ass.

[BigBlockSam]

   you done yet?

[A383Wing]

probably further along than Stu is with his tranny   

[Daytona R/T SE]

probably further along than Stu is with his tranny  

Two words that keep popping up all the time in the same sentence...


"Stu"

and...

"Tranny"



Coincidence ?

[Daytona R/T SE]

  you done yet?

Going to spend some quality time with the blast cabinet tomorrow.

Hopefully get some small parts painted.

Bolts, washers, trunk lid torsion bars...

Maybe bolt the trunk lid on this Sunday if I get that far...

[BigBlockSam]

probably further along than Stu is with his tranny   

[moparstuart]

probably further along than Stu is with his tranny  

Two words that keep popping up all the time in the same sentence...


"Stu"

and...

"Tranny"



Coincidence ?

So whats a matter with that   

[JB400]

probably further along than Stu is with his tranny  

Two words that keep popping up all the time in the same sentence...


"Stu"

and...

"Tranny"



Coincidence ?

When he starts cross dressing, then you need to worry.

[FJ5WING]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

Hope you get more than one spray out of the nozzle before it stops up.  I didn't have too good a luck with mine.

"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."

So...

That's why they sent extra nozzles...

At $25 a can, and a month's wait to get it, this stuff had better be awesome.

Im not going to let you get set up for a big let down, so.....Don't be disappointed if don't don't get anything out of the cans! I have 6 cans that wouldn't have spraedy enough to paint my trunk lid striker. 

[Daytona R/T SE]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

Hope you get more than one spray out of the nozzle before it stops up.  I didn't have too good a luck with mine.

"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."

So...

That's why they sent extra nozzles...

At $25 a can, and a month's wait to get it, this stuff had better be awesome.

Im not going to let you get set up for a big let down, so.....Don't be disappointed if don't don't get anything out of the cans! I have 6 cans that wouldn't have spraedy enough to paint my trunk lid striker.  

I'll find out if they're any good this afternoon.

Setting up blast cabinet now.

Stay tuned...

[Daytona R/T SE]

This finally showed up yesterday.

For painting nuts, bolts, small brackets, my fingers, some of the floor...

maybe a few spots on the wall, etc.

Hope you get more than one spray out of the nozzle before it stops up.  I didn't have too good a luck with mine.

"IF YOU'RE UNDER CONTROL, YOU AIN'T GOING FAST ENOUGH."

So...

That's why they sent extra nozzles...

At $25 a can, and a month's wait to get it, this stuff had better be awesome.

Im not going to let you get set up for a big let down, so.....Don't be disappointed if don't don't get anything out of the cans! I have 6 cans that wouldn't have spraedy enough to paint my trunk lid striker.  

I'll find out if they're any good this afternoon.

Setting up blast cabinet now.

Stay tuned...

The paint sprayed fine.

Color doesn't quite match, but it's only for the little stuff that doesn't really matter...

Bolts, brackets...etc.





On another note...

I got the trunk lid bolted on today.

Did I mention that I hate dealing with trunk lid torsion bars ?  

[Daytona R/T SE]

The trunk lid is now adjusted and latched.

[A383Wing]

 

[Daytona R/T SE]

I almost hate to put that huge stripe on the blue paint.

     

[A383Wing]

decal or paint?

[Daytona R/T SE]

decal or paint?

Decal.

I was waiting to order it until I got this far.

You're  not supposed to leave them lay around too long before using them.

[Stevearino]

I almost hate to put that huge stripe on the blue paint.

         

Funny I never thought about it until now but you never see a Daytona with a wing the same color as the car and yet all Superbirds look just fine that way.

[A383Wing]

yea...'Tona wings are never body color...'Bird wings always are..

I have decal on mine....everything went fine until the drivers side piece...the guy putting in on got a wrinkle in the top portion next to where the wing is bolted on the quarter panel....he could not get it out, pissed me off, been that way since the 90's....