News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

wiper pivot rebuild

Started by Dmichels, September 28, 2015, 08:56:26 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Dmichels

September 28, 2015, 08:56:26 PM
I had a trashed pivot so I decided to tear it apart. Grind the swagged end off They are fixable if they are not as trashed as the one I show hear. If the shaft is not pitted you can get new brass bushings and reassemble it. You can tack weld the arm back on. Just wanted to pass this along to you guys.

68 440 4 speed 4.10

PlainfieldCharger

#1
October 01, 2015, 07:39:15 AM
Looks great! I added a grease fitting to mine... :Twocents: I would have like to gone this far with it... :cheers:

Dmichels

#2
October 01, 2015, 01:02:59 PM
A grease fitting is a great idea you do not need to worry about cooking the lube out of it when you weld the arm back on.
68 440 4 speed 4.10

Nickrc3

#3
October 04, 2015, 10:57:22 AM
...drill undersize, thoroughly clean out shaft, and use a self-tapping grease fitting. As seen, I added JB Weld. Works great.


PlainfieldCharger

#4
October 05, 2015, 07:06:48 AM
Looks like that will do the job ;)
Print
Go Up Pages1
User actions