News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Quarter glass rubber stops

Started by Dino, February 29, 2016, 10:50:20 AM

Previous topic - Next topic

Dino

On a 2nd gen each quarter panel has two metal stops that stop the large bracket holding the glass going up. They are mounted high on the inner panel.

Each has a rubber band around them. Mine are either worn or missing. Does anyone sell these?
Extraordinary claims require extraordinary evidence.

72Charger72

Wondering same thing as I found one missing on mine last weekend.

HeavyFuel

I used several thick rubber o-rings instead of the original rubber band, then dipped the o-rings in liquid rubber (plasti-dip) to eliminate any possibility of movement.  The area is concealed, so what the heck.

Dino

Cheater!

...okay I may have to do something like that.
Extraordinary claims require extraordinary evidence.


VegasCharger

Heater hose is another trick you can do.

rebby

Quote from: VegasCharger on March 14, 2016, 11:43:17 PM
Heater hose is another trick you can do.

If I remember correctly, I used vacuum line. Same concept but then I didn't have to deal w/the cotton fibers that a lot of heater hoses have.
Curt Rebelein, Junior
1969 Charger R/T SE (500 Stroker/833/D60 w/XP VIN)
1969 Charger (440/727/8.75, GL Project)

b5blue

For odd ball stuff like that I use "Sugru". It's like putty that hardens to rubber.
https://sugru.com

CDN72SE

1972 Charger SE