News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

68 charger Fuseable Link

Started by pontiac charger, January 19, 2017, 01:05:44 PM

Previous topic - Next topic

pontiac charger

How hard is it to replace or repair the Fuseable link on a 68 charger.   The one that goes to the starter relay and have the rubber section on the fire wall.

Thanks for the help.

71charger_fan


70sixpkrt

Not hard at all. I just replaced mine a few months ago. Just unbolt it from the relay. Just push it and slip it out from the bulk head connector.


440-6pk, 4-speed, Dana 60 with 3:54  
13.01 @107.93 (street tires spinning all the way down)

M5Ivan

Quote from: 70sixpkrt on January 20, 2017, 12:12:51 AM
Not hard at all. I just replaced mine a few months ago. Just unbolt it from the relay. Just push it and slip it out from the bulk head connector.

I replaced mine and couldn't get it out of the harness without some modification to it. If you have difficulty removing the end from the harness, I read that you should just snip the male end of it (this removes the tab).
Good luck!