DodgeCharger.com Forum
July 22, 2019, 03:43:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: C500 short headliner bows?  (Read 765 times)
hemiron1
New Member
*
Offline Offline

Posts: 49


« on: July 22, 2017, 10:01:32 AM »

Are the short headliner sail panel bows used in C500'S?
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #1 on: July 22, 2017, 02:33:28 PM »

Are the short headliner sail panel bows used in C500'S?
not having luck loading pics...
Logged
chaaargerb
Junior Member
**
Offline Offline

Posts: 143


« Reply #2 on: July 22, 2017, 08:38:26 PM »

I didn't have my headliner out of my 500 but I don't think they are used in a 500. If I remember right the headliner kinda of wraps over the original edge of the rear window and then just extends to the plug.
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #3 on: July 22, 2017, 08:58:56 PM »

Makes sense.  Also it looks like the original headliner teeth are still in place around the original window. Unfortunately getting this car completely apart it's impossible to know. I have the headliner teeth in place but pulling the headliner back the old teeth seem to show. Do you think they did it that way? I'm guessing anyone that has one could feel or see that. Thanks Ron
Logged
chaaargerb
Junior Member
**
Offline Offline

Posts: 143


« Reply #4 on: July 22, 2017, 09:12:49 PM »

 I Just put the headliner in my Sbird and the original window teeth were removed on my car. I would think they would do the same on the 500's otherwise they would probably poke thru
Logged
richRTSE
Senior Member
****
Offline Offline

Posts: 750


« Reply #5 on: July 24, 2017, 03:20:23 PM »

here is a pic of the headliner I removed from my 500. It did not have the small bows.

 cheers


* headliner500.JPG (342.09 KB, 807x761 - viewed 111 times.)
Logged
richRTSE
Senior Member
****
Offline Offline

Posts: 750


« Reply #6 on: July 24, 2017, 03:24:33 PM »

#2...


* headliner500_2.jpg (225.94 KB, 692x516 - viewed 108 times.)
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #7 on: July 24, 2017, 03:24:55 PM »

Were the old Charger window headliner teeth still in place in the old rear window???
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #8 on: July 24, 2017, 03:33:47 PM »

#2...
were the old rear window teeth removed from the original rear window?
Logged
richRTSE
Senior Member
****
Offline Offline

Posts: 750


« Reply #9 on: July 24, 2017, 03:49:09 PM »

I'm pretty sure they modified the originals and reused them...you can see the upper looks like its just been moved down and secured with sheet metal screws instead of those pinch-type fasteners I think they used on the standard mounting...and the side pieces look like they just trimmed them to fit...


* headliner500_4.jpg (190.12 KB, 963x513 - viewed 101 times.)

* headliner500_3.jpg (261.69 KB, 536x917 - viewed 108 times.)
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #10 on: July 24, 2017, 03:58:44 PM »

I'm pretty sure they modified the originals and reused them...you can see the upper looks like its just been moved down and secured with sheet metal screws instead of those pinch-type fasteners I think they used on the standard mounting...and the side pieces look like they just trimmed them to fit...
I'm wondering why mine still had the original teeth still in place all the way around? Including the lower piece for the old package tray.... Build date of 12/04/68.
Logged
richRTSE
Senior Member
****
Offline Offline

Posts: 750


« Reply #11 on: July 24, 2017, 04:06:00 PM »

 shruggy

not sure...but mine had a build date of Sept 29th....maybe they had a better system in place by December...or lots of extra parts...Huh

also, my side pieces (2 separate pieces on each side) were welded to the plug...top piece screwed on...  Twocents
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #12 on: July 24, 2017, 04:06:45 PM »

I'm pretty sure they modified the originals and reused them...you can see the upper looks like its just been moved down and secured with sheet metal screws instead of those pinch-type fasteners I think they used on the standard mounting...and the side pieces look like they just trimmed them to fit...


* Studio_20170724_170554.jpg (143.38 KB, 497x496 - viewed 95 times.)
Logged
hemiron1
New Member
*
Offline Offline

Posts: 49


« Reply #13 on: July 24, 2017, 04:07:45 PM »

shruggy

not sure...but mine had a build date of Sept 29th....maybe they had a better system in place by December...or lots of extra parts...Huh

also, my side pieces (2 separate pieces on each side) were welded to the plug...top piece screwed on...  Twocents
same with mine.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.069 seconds with 17 queries.