DAYTONA TRUNK HINGE- STAINLESS A-PILLAR TRIM

[daytonalo]

 Option 1 -Been thinking about making a run of Die bent Daytona trunk hinges ,  UPDATE 1/16/18,  since I only received 4 orders and to make it worth my time to drive 4 hours to get steel and pull out tooling , I need 319.00 shipped lower 48 thru pay pal invoice .
Option -2 Pair hinges matched raw steel , you trim and drill own pivot , no c- channel . 250.00 shipped lower 48

New square tube fixture formed steel Daytona / trunk hinges . Slightly thinner wall than orig but the radiused areas are nice . We have all seen some builders  attempt to make their  own the results are either kinks or the end result is a hinge that looks nothing like the original !!
The pair hinges come with brake bent C-Channel and pivot hole drilled in hinge , you must transfer the stock oem torsion ramp from the orig hinge and fabricate a stop . Shipped in acid primer

SUPERBIRD / DODGE DAYTONA CHARGER -500,  , NEW REPRODUCTION MIRROR STAINLESS STEEL A PILLAR STAINLESS STEEL ( OFTEN REFERRED TO AS WIND DEFLECTORS ) EACH PAIR ARE MADE FROM 20 GAUGE MIRROR STAINLESS AND ACTUALLY TEST FIT ON CAR TO INSURE THERE ARE NO ISSUES .SUPERBIRD SET DOES NOT HAVE HOLES ON FRONT FACE ,MOST CUSTOMERS ARE BUILDING CLONE AND PREFER MOUNTING METHOD OF DAYTONA .TOOLING HAS RECENTLY BEEN UPDATED SO THEY LOOK AND FIT VERY NICE. EACH SET WILL CAREFULLY WRAPPED AND PADDED TO INSURE THEY ARE NOT DAMAGED IN TRANSIT. 450.00 SHIPPED LOWER 48

[BigBlockSam]

hey  man good to see your still around. the hinges i bought from you worked great and look right too . 

[daytonalo]

Funny how you showed your appreciation  !

[moparstuart]

   this guys back  , shouldn't  you be working on a boat or something     

[daytonalo]

Ok, pile on 

[Old Moparz]

Boating season must be over.

[aerolith]

Nice hinges, good to see someone who can still do PROPER Engineering... even without a shirt...

Never trust an engineer who doesn't wear overalls or doesn't have a ZEUS book in his top pocket...
Imperial version and not Euro metric tosh...

[charger chris]

I would like to get a set. Let me know if you make them.

[daytonalo]

Thanks , your on the list . Text me your contact info so I have a way to contact you .

Larry
609-315- two six four zero

[odcics2]

Anybody have a 500 or Daytona clone with original A pillar trim on it?

Please consider this offer: I'll buy you a brand new set of Larry's A trim and give you $$$ for your pr. of original used trim.
Your trim would be going on the #88 Daytona.   
PM if interested.  Thanks.

[charger chris]

Oh you make those too. They look nice. Now all I got to do is find someone to make a steel nose.

[Daytona R/T SE]

Oh you make those too. They look nice. Now all I got to do is find someone to make a steel nose.

Gene Gregory makes them.

Just bring a big stack of hundreds.

[Davtona]

Anybody have a 500 or Daytona clone with original A pillar trim on it?

Please consider this offer: I'll buy you a brand new set of Larry's A trim and give you $$$ for your pr. of original used trim.
Your trim would be going on the #88 Daytona.   
PM if interested.  Thanks.

I assume you have seen this but in case you haven't.

https://www.ebay.com/itm/NOS-69-Dodge-Charger-500-Daytona-Driver-Side-A-Pillar-Moulding-Part-3412151/142589496783?epid=2239543735&hash=item2132ff0dcf:g:U38AAOSwu2VZX~Na&vxp=mtr

[odcics2]

Thanks very much for the heads up. I worked a best offer deal with the seller.

Now, I just need an original pass side "A" moulding. (used is ok)


NEW OFFER:  I'll trade a set of Larry's new "A" trim for one original pass side...   

**OR**  Both of my original #30 Dave Marcis Daytona "A" trim for one original pass side.   

[farm966]

Interested in a set of hinges, when will you be making them?

Thanks

David

[daytonalo]

When I get ten sets ordered. Text me your info. I have 3 so far

[moparmendy]

i tried to contact you regarding hinges..not sure if you got the email..but i would like a set..
gary
440=522=0048

do you have the a pillar sets in stock?

thanks

[steve817]

Hello Dayclona
I need (2) two sets of the Trunk Hinges. How long to get them to my door and how do I get you paid up?  I also need window plug and the the deck lid close out piece. I already have the A piller wind deflectors. I'm not a tire kicker...I really need pieces and hopefully you can help out!  Thanks, Steve

[daytonalo]

Gary, I have you on list. Steve contact mike @ Dayclona

[steve817]

PM could not be sent to 'daytonalo' as their inbox is full!

I would like to purchase (2) two sets of the Trunk Hinges. Is your name Larry or Mike? Thanks, Steve

[daytonalo]

If its the Police its mike , other than that its Larry . Mailbox empty , send contact info . So far 6 sets .

[BigBlockSam]

If it the Police its mike , other than that its Larry . Mailbox empty , send contact info . So far 6 sets .
Also my 1969 charger in " cars for sale " This is going to draw great applause by many , I'm officially exiting the Daytona world and more than likely all old cars , been there done that . If my leaving the hobby is going to cause depression , ill stick around !  Pursuing HP aircraft, plan on going 200 mph + all day long, Vans RV-8   icon_smile_big

[birdsandbees]

You know you can do both Larry!! 

[daytonalo]

There's a guy with all the money!!

[birdsandbees]

I wish, all blood sweat and tears.... you can't build and sell airplanes from a 2 car garage! Something I've been doing for 24+ years, mind you I did build the first one in a 1.5 car garage! That's it on the amphibs, now 24 years later, the green/white DJK that's my own personal ride.

[aerolith]

Cripes, that three times the size of my bungalow!!!

(Bungalow, small rural dwelling near the Sea UK)

Actually 'my garage' is bigger than my bungalow, (don't tell the wife)...

[alfaitalia]

Lol...last time i looked in the dictionary a bungalow was a single story house...full stop...location does not come into it....best suited to the over 60s...lol!


bungalow
ˈbʌŋɡələʊ/Submit
noun
a low house having only one storey or, in some cases, upper rooms set in the roof, typically with dormer windows (usually referred to as chalet bungalows).



I have to hire a unit for my Charger build..my house (also by the sea...two storeys though !) has a small single car garage which, like most people's is full of all sorts of crap...except a car!

[daytonalo]

Beautiful aircraft ! What do you think about vans r-8 ? 

[birdsandbees]

VANS or Murphy, the only two kit manufactures in the homebuilt industry that I have any respect for!

I've had many of both around here, but I'm a high wing kinda guy. I hate getting to destination, looking down and can only see a wing!! 

[Stevetona]

High wings all the way. 

[charger chris]

Any new updates?

[daytonalo]

Nope , taking nap

[odcics2]

Nope , taking nap

What a salesman!   

[moparstuart]

Nope , taking nap

What a salesman!   

Winning personality too

[Old Moparz]

Nope , taking nap

[wingcar]

Any update on when you might start production once more on the hinges.....?   Would like to stop using duct tape to keep the trunk lid on.....

[daytonalo]

Sorry for delay , been out town . Here's the deal , only received 4 orders , that said , in order to drive four hours to pick up steel and then drag out tooling in the coldest winter in 50 years I need to get 319.00 shipped lower 48 thru pay pal invoice . I can have them ready to ship in 10 days  Text me @ 609-315 two six four zero to place order and Ill send an invoice

Thanks
Larry 

[daytonalo]

finally started bending process however  far from done

[daytonalo]

Option -1 , 319.00  pair shipped  lower 48 with c-channel , drilled pivot hole and in self-etch

Option -2 , 250.00  pair  shipped  lower 48 , raw steel , you trim and drill pivot , no c-channel

Text 609-315 two six four zero
Pay-pal add 7.50 for fee  or gladly take personal check

[kevs1969daytona]

Would you ship the Canada the trunk hinges if I pay for any shipping issues Thanks.  My body guy was going to try and fabricate them from a regular charger hinge but it sounds like a lot of work $250 saves him a lot of time.

[daytonalo]

sure , text me 609-315 two six four zero

Larry

[charger chris]

Thanks for working with me Larry 

[daytonalo]

No problem . Anyone else need them as I only make them every ten years or so and not sure  have ten years left in me

[charger chris]

I got my stuff today. Some really nice stuff.    thank you.

[Jed2500]

I def need a set of hinges!
Trailor96@hotmail.com

[nascarxx29]

Riks parts also repoed them

[aerolith]

Nice workmanship indeed!

Wish I had done a Daycloner NOW!

BOOHOO...

C-500 POSTS for me, now I am Donne...(no man is an Island)...

[Lifsgrt]

Hey Larry, finally got those A-pillar covers to Speed Week 2021. They were good for 187mph on the short course right out of the trailer and ultimately to almost 231mph where I burned a piston! I am sure they will see 240+ next year after I fix my engine, get the car class correct, and make a few other changes! Thanks for building such a beautiful product!

[daytonalo]

Congratulations!!!! Thanks for those kind words

Larry