DodgeCharger.com Forum
November 16, 2018, 05:42:34 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Superbird rear package tray help  (Read 440 times)
john686970
New Member
*
Offline Offline

Posts: 26


« on: February 12, 2018, 07:50:03 PM »

I am building a Superbird clone at my job. Can someone tell me how the factory installed the cardboard package tray? does it just lay on the old curved window channel? Installed this way the edge will be about 2 inches in the window area on the plug. Thanks for any help
Logged
chaaargerb
Junior Member
**
Offline Offline

Posts: 135


« Reply #1 on: February 13, 2018, 07:49:58 AM »

It does go over the original window channel. I purchased a repo package tray from R.E.M. It came straight with no bend in it. It also seemed to have a heavier insulation padding on the bottom. I ended up trimming some of the insulation padding off the area were it bends. It fits pretty nice but be careful not to force it to bend. If you force it you may crack it. Hope that helps.   


* sjtutndnebfbrvs113.JPG (133.42 KB, 640x480 - viewed 164 times.)
Logged
john686970
New Member
*
Offline Offline

Posts: 26


« Reply #2 on: February 13, 2018, 07:54:42 PM »

Ok cool tym. The package tray we got in from REM also.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.041 seconds with 16 queries.