News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Converting from 3 prong headlights to two prong

Started by phantom, May 29, 2018, 04:25:54 PM

Previous topic - Next topic

phantom

Hello. Have new headlights, originally for a BMW installed. And Painless wiring. Anyone done the conversion from the old 3 prong to two before? Why do the stock lamps need 3 inputs?

green69rt


phantom

Ahh, ok. So both lamps on each side have low and high beams? My new lamps are separate, only high beam on the inner lamps. I`ll just separate the two cables then.

Nacho-RT74

Outers are low and highs filaments into the same housing. Inners are just highs. The common is ground
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html