News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

edelbrock e street heads

Started by darkside, July 26, 2018, 08:57:41 PM

Previous topic - Next topic

BSB67

If it were mine, I'd put CR at 10.2 or 3, good quench, go with a slower ramp cam in the 230-234 intake duration in on a 112 ° and installed at 110° or 112°.  That would be a bunch of fun.

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

bee1971

383 / 432 Stroker - 440 Source

E Street 75 CC Heads

Pistons .015 In The Hole - 10.5 Compression
195 PSI Cold Cranking Compression On All Eight

Comp Cams XE 275 HL Installed Straight Up/Dot To Dot
Howard's Cam Billet Timing Chain Set 9 Way

On The Street 3:91 Gears / 275 /60 - 15 Tires

FUN  :2thumbs:



darkside

What rocker arms would be a good choice to run with these heads with no modifications.
Will my stock ones work fine or do i need roller rockers ?

c00nhunterjoe