News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

fuel pump

Started by poppa, May 09, 2019, 02:15:37 PM

Previous topic - Next topic

poppa

Hi all! Want to make my fuel line "hard plumbed". Anyone make a pump that accepts fittings? Engine is a 70 - 440 w/an aftermarket 6 pak. Thanks
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

poppa

Just saw this one (in one of my posts  :brickwall:). Any place better than the other to get this?

http://www.dodgecharger.com/forum/index.php/topic,133774.0.html
God must love stupid people....he made a sh**load of 'em....

Matco tools...guaranteed for a lifetime. Just not a human lifetime.

Canadian1968

it's just a carter HV pump. you can get them any where

XH29N0G

I think Carter PN M6903.  I bought one like that with a fitting from NPT to the flare fitting with the appropriate angle (37.5 vs 45 degree). Used Al tubing and a tubing bender to make my own.  I had some funny thing with the NPT adapter and the pump.  I don't think it was a taper thread vs A/N issue, but more like the adapter was too long to thread properly.  I had to clean the threads and tap again on the pump side.  The pump itself can be disassembled for cleaning, so is nice in that respect. 
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....

b5blue

6903 will work @ 5-6LBS pressure.