News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Cost to rebuild heads on 68 383 HP

Started by triple_green, September 27, 2018, 12:44:11 PM

Previous topic - Next topic

triple_green

What should it cost to have the heads rebuilt on my 68 383 HP motor?

Thx!
68 Charger 383 HP grandma car (the orignal 3X)

cdr

To be done correct down here, 1500.00, Guides, Valves, Hard exhaust seats,good valve job springs, ECT. if you want stock looking get some Stealths
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

tcs69rt

I paid $850 for a pair of 69 HP heads at Rocky Mountain Machine in Colorado Springs but that was 5 years ago. Good Luck. Phone, (719) 591-7915 ยท Address. 3521 E St Vrain St; Colorado Springs, Colorado 80909
"Life ain't easy when you rode the short bus."