DodgeCharger.com Forum
July 19, 2019, 10:25:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Scraptona  (Read 1698 times)
Seabeckredneck
Junior Member
**
Offline Offline

Posts: 100



« on: December 07, 2018, 01:19:44 PM »

 Here's a Hot Rod article about an interesting Daytona build. A fun, race car look alike...
https://www.hotrod.com/articles/1969-dodge-charger-scraptona/?wc_mid=4035:14727&wc_rid=4035:31786439&_wcsid=8798487E4F2D88C3D71D65F34F32BE1AE13EE79DF4BEFD04
Logged
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #1 on: December 07, 2018, 02:38:20 PM »

I'm building my own Daytona stock car clone that will be a 200 mph Hemi powered dual quad, fuel injected, 6 speed equipped Daytona clone.  It is built on a circa Laughlin Nascar chassis, circa 2005.  The plan is to have a Daytona stock car clone that will be driven on the street!


* rsz_20180213_143418.jpg (194.83 KB, 1024x768 - viewed 835 times.)
Logged
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #2 on: December 07, 2018, 02:41:53 PM »

More


* rsz_20180213_143451.jpg (160.17 KB, 1024x768 - viewed 813 times.)
Logged
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #3 on: December 07, 2018, 02:44:38 PM »

One more


* rsz_20180617_130448.jpg (140.37 KB, 1024x768 - viewed 801 times.)
Logged
farm966
Junior Member
**
Offline Offline

Posts: 194


My 'bird


« Reply #4 on: December 08, 2018, 02:14:23 PM »

I like the Scraptona, when you start drilling holes in your shift knob to lose weight you are getting serious.
Logged
Ryan.C
Senior Member
****
Offline Offline

Posts: 548


.


« Reply #5 on: December 09, 2018, 05:01:12 PM »

I'm building my own Daytona stock car clone that will be a 200 mph Hemi powered dual quad, fuel injected, 6 speed equipped Daytona clone.  It is built on a circa Laughlin Nascar chassis, circa 2005.  The plan is to have a Daytona stock car clone that will be driven on the street!

This really cool.  coolgleamA

Where did you get a nascar chassis? I'm sure it wasn't craigslist.

Do you have a build thread link?
Logged

There are few problems in life that cannot be solved with C-4.
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #6 on: December 09, 2018, 05:27:16 PM »

I have build threads on Moparts,and on For B Bodies only. The threads are titled"A stock car flaming with a loser at the cruise control". I would have posted a thread here too,but I would have to resize every picture. I bought the car from a member of here and Moparts. The chassis was built by a Nascar shop in North Carolina. The plan is to build a 200 MPH Daytona stock car that I can drive on the street.
Logged
Ryan.C
Senior Member
****
Offline Offline

Posts: 548


.


« Reply #7 on: December 11, 2018, 08:00:38 PM »

Thanks ill look for it on FBBO
Logged

There are few problems in life that cannot be solved with C-4.
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #8 on: December 11, 2018, 09:51:52 PM »

It is in the Daytona/Superbird section.
Logged
Ryan.C
Senior Member
****
Offline Offline

Posts: 548


.


« Reply #9 on: December 12, 2018, 12:38:23 PM »

I subscribed to your thread on FBBO. What a cool build, Thanks again  cheers
Logged

There are few problems in life that cannot be solved with C-4.
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #10 on: December 12, 2018, 03:37:56 PM »

Thanks, the project is a little out of my comfort zone as far as setting up the chassis, so I am hoping to find a local racecar builder that can help me with that aspect of the car.  I  can do the body work, metal fabrication work, and most of the mechanical work myself.  I remember seeing a thread on your Charger build as well. .The car came out great, and I really like that color on a Charger.
Logged
Ryan.C
Senior Member
****
Offline Offline

Posts: 548


.


« Reply #11 on: December 12, 2018, 05:53:29 PM »

Thanks for the complement  cheers

Ill be following your build as I have been kicking around the idea of doing a daytona on a Nascar chassis in hope's of a bonneville run in the future
Logged

There are few problems in life that cannot be solved with C-4.
chargervert
Senior Member
****
Offline Offline

Posts: 840


« Reply #12 on: December 12, 2018, 07:30:36 PM »

My friend and his wife went 208 MPH at Bonneville with their Daytona stock car.
Logged
Vegas_Nick
Full Member
***
Offline Offline

Posts: 228


« Reply #13 on: December 12, 2018, 09:38:21 PM »

I'm building my own Daytona stock car clone that will be a 200 mph Hemi powered dual quad, fuel injected, 6 speed equipped Daytona clone.  It is built on a circa Laughlin Nascar chassis, circa 2005.  The plan is to have a Daytona stock car clone that will be driven on the street!

I'd like to hear more detail on this build. This is the EXACT plan once I am done with my Buddy Baker car.
Logged

djcarguy
Old Timer
*****
Offline Offline

Posts: 1,821



« Reply #14 on: December 12, 2018, 10:29:16 PM »

My friend and his wife went 208 MPH at Bonneville with their Daytona stock car.
   more info an pixs of 208 mph car?? or link to 208 car info  ?? thanks neat build your doing. 
Logged
djcarguy
Old Timer
*****
Offline Offline

Posts: 1,821



« Reply #15 on: February 17, 2019, 11:05:55 PM »

My friend and his wife went 208 MPH at Bonneville with their Daytona stock car.
   more info an pixs of 208 mph car?? or link to 208 car info  ?? thanks neat build your doing. 
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.057 seconds with 17 queries.