News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1967 Power Steering Box High Pressure fitting

Started by 69Chrgr, February 19, 2019, 08:21:15 AM

Previous topic - Next topic

69Chrgr

Could someone please tell me what the thread or P/N is for the high pressure fitting adapter is that goes onto the steering box for the high pressure hose from the pump?

John_Kunkel

P/N for the pre-'69 fitting (Mopar calls it an adapter) is 1618610. It is 5/16" flare, the '69-later is 1/4" flare. The threads in the box are 1/2"-20.
Pardon me but my karma just ran over your dogma.

69Chrgr

Thanks John. This thing was a PIA to find. I finally ordered one through Bouchillon Performance. Thanks again for the response.