DodgeCharger.com Forum
August 21, 2019, 01:09:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Charger shoulder belt snap question  (Read 399 times)
steve817
New Member
*
Offline Offline

Posts: 28


« on: March 22, 2019, 09:45:22 AM »

Regarding to a 69 Charger shoulder mounted seat belts. Did the factory put two places for the elastic/snap to snap into to hold the shoulder belt up? Could I please get a pic or two of the shoulder belt where it's bolted (Headliner area where the hook is) on original car. I tried to post pics but error occurs. Thanks!
Logged
triple_green
Old Timer
*****
Offline Offline

Posts: 1,215


68 Charger 383 HP 66-1 green


« Reply #1 on: March 23, 2019, 10:37:23 AM »

this is a late 68 (may) build, IDK if it is the same as 69.

some measurements to help.
from the top of the inside trim to the lower side of the snap following the headliner pleat line. is 2"
from the edge of the bolt holding the belt into the headliner/roof to the center of the snap (horizonally) is 4"


* snap.jpg (82.61 KB, 640x480 - viewed 119 times.)
Logged

68 Charger 383 HP grandma car (the orignal 3X)
gtx6970
Old Timer
*****
Offline Offline

Posts: 3,163



« Reply #2 on: March 23, 2019, 12:15:31 PM »

Use your finger and feel around the above shown area you can probably find it.
I did as such and found what I was pretty certain was the screw hole mentioned.
So I took a needle  and did some poking around said area to be 100% certain before I took a screw to it. Nailed it perfectly btw
Logged
steve817
New Member
*
Offline Offline

Posts: 28


« Reply #3 on: March 23, 2019, 10:17:23 PM »

Perfect pic and explanation! I got mine installed. Thanks as always.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.043 seconds with 16 queries.