News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

2nd generation rear valance panels: AMD fit

Started by hemi68charger, May 27, 2019, 10:27:03 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

hemi68charger

May 27, 2019, 10:27:03 AM
Hello All,

If I may, for those that have been-there-done-that, what are the issues one may encounter using the AMD rear valance product for their restoration? I'm comtemplating the purchase of an NOS unit, that isn't cheap, versus an AMD unit that is much cheaper, but I run into issues of labor associated with sheetmetal tweeking...

Thanks...
Troy
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

Ryan

#1
June 11, 2019, 06:09:35 PM
buy the NOS. I have mocked up the AMD , goodmark and the NOS piece to my 69 and it was a no brainer.   The back to back bends under the bumper are nowhere near correct on the AMD piece.
69 charger r/t Triple Black
   572 HEMI, Passion 5 speed, 4.10 Dana under construction

2014 viper TA

Ryan

#2
June 11, 2019, 06:16:30 PM
AMD





NOS



69 charger r/t Triple Black
   572 HEMI, Passion 5 speed, 4.10 Dana under construction

2014 viper TA

Mike DC

#3
June 12, 2019, 01:59:54 AM
           
We need to start a thread that lists "problems and fixes with repro sheetmetal" and stick it to the top of the bodywork forum.  Everyone has to deal with these same issues.   

Print
Go Up Pages1
User actions