News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Holes for windshield trim clips for '69 Charger

Started by geffen928, September 17, 2019, 07:12:56 PM

Previous topic - Next topic

geffen928

Evening Gents.......It seems my trim clip mounting holes have been filled with  POR-15.  I've found all the holes at the base of the windshield, and the bottom 2 going up the A-Pillar.  I need the location of the top hole on the A-Pillar and all holes across the top of the windshield.  A dimensioned drawing is not necessary, just a clear picture that would give me an idea where to start poking.

Geffen

ChargerRT69

Did you ever get your information? I am about to start mine and I have them marked with a sharpie. You will might need to do some poking, but it will get you in the general area.