January 27, 2023, 01:39:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of shirts!
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
Author Topic: '73 bumperettes  (Read 514 times)
Old Timer
Offline Offline

Posts: 1,032

73se 400 magnum

« on: December 15, 2019, 09:26:24 AM »

I just took mine off. These things weigh like 7 pounds each! I got some chrome caps to fill in the holes and it looks pretty cool like that. Now i'm thinking about how to fill in the small cut outs where the rear brackets were. Has anyone done this? Any tips?

Later on down the road I may get side pipes yesnod And then I will likely want to do something about the 2 indentions for the exhaust pipes on that rear valance as well. I would look weird without pipes there. If any 3rd gen guys have done this I'ld like to see pics. 2thumbs
Old Timer
Offline Offline

Posts: 19,561

Tired of everything

« Reply #1 on: December 15, 2019, 04:37:27 PM »

If you are talking about the rear valence cut outs for the rear bumperguard brackets... get a 71/72 rear valence and done. Without exhaust cut outs if you are thinking on remove exhaust from rear

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually:,7603.0/all.html,25060.0.html
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.043 seconds with 17 queries.