January 27, 2023, 02:29:42 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: decals are available here!
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
Author Topic: Repacing broken studs on door bracket  (Read 533 times)
Junior Member
Offline Offline

Posts: 54

« on: May 04, 2020, 11:39:49 AM »

Has anyone tackled replacing broken/rusted studs on these brackets?

* charger door bracket.jpg (102.27 KB, 640x480 - viewed 172 times.)
Old Timer
Offline Offline

Posts: 1,884

« Reply #1 on: May 13, 2020, 10:26:52 PM »

I used flat head carriage bolts for my seat track bolts  that I snapped of when I took them out   those bolts are  like spot welded to the bracket  I took my wire welder and tacked them on the inside  the bolts I used were from a garage door the ones they use to hold the bracket to the door  they are ones that go through the door panel they look just like the factory bolt
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.041 seconds with 17 queries.