News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dane Wing install

Started by cdr, July 09, 2020, 11:42:30 AM

Previous topic - Next topic

cdr

Hello, I looked & looked with the search function & to no avail, what is the width and depth of a Daytona,Superbird front spoiler ?
Thanks
Charlie
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

hemi68charger

Quote from: cdr on July 09, 2020, 11:42:30 AM
Hello, I looked & looked with the search function & to no avail, what is the width and depth of a Daytona,Superbird front spoiler ?
Thanks
Charlie

Charlie... I have a spare spoiler I can take some measurements from and then there's the one on my Daytona...

Troy
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

cdr

Quote from: hemi68charger on July 09, 2020, 11:56:41 AM
Quote from: cdr on July 09, 2020, 11:42:30 AM
Hello, I looked & looked with the search function & to no avail, what is the width and depth of a Daytona,Superbird front spoiler ?
Thanks
Charlie

Charlie... I have a spare spoiler I can take some measurements from and then there's the one on my Daytona...

Troy

That would be AWESOME :) thank you Troy,  there is some Skunk works going on with my Charger :)
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

odcics2

Here's a good design for a Charger.
Birds and Daytonas required a different shape.   :Twocents:
I've never owned anything but a MoPar. Can you say that?

cdr

Quote from: odcics2 on July 09, 2020, 12:41:25 PM
Here's a good design for a Charger.
Birds and Daytonas required a different shape.   :Twocents:

I appreciate that, I was wanting to get rid of the camaro one that I have now, & use the Daytona one on the 68 front end for now & then when I get a Daytona nose & would already have the spoiler. looking at the one from Perfomance Car Graphics , the +2 in depth. I ordered a Daytona wing from Dane & have the trunk braces already, thanks again. this will be a SLOW CLONE build lol.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

70 sublime

Ummm is the hole in your hood getting bigger ?
next project 70 Charger FJ5 green

cdr

Quote from: 70 sublime on July 09, 2020, 02:23:22 PM
Ummm is the hole in your hood getting bigger ?

if it gets any bigger it will be GONE LOL :)

OOOPPS I corrected my misspelling of Spoiler LOL 
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

PettyMower

My original Superbird spoiler that's been taken off and laying flat, measured 51-1/2" tip to tip.

Measuring the amount that stick outward from the nose, from the inside of the bend, was 3-1/4".

Jay

cdr

Quote from: PettyMower on July 10, 2020, 08:29:59 PM
My original Superbird spoiler that's been taken off and laying flat, measured 51-1/2" tip to tip.

Measuring the amount that stick outward from the nose, from the inside of the bend, was 3-1/4".

Jay

Thank you Jay !!!
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

I am now in the Wing car club,,, well,,,,,,,,,,,almost 🙂  Got the Daytona ALUMINUM wing mocked up, holes drilled, got the wing washers in,,, paint tomorrow for the wing and then install, thank you Dane Gjesdal
for coming up with these wings, and your son Justin Gjesdal
did a very nice job on this wing, it's like Christmas for me
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

Still got to finish the trunk braces but got everything pretty much mocked up, the charger is now a wing car.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

XH29N0G

The word that comes to mind is:  Excellent  :2thumbs:  Most Excellent.
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....

70 sublime

Make sure you get a picture of it in the door mirror will make it feel so much more real  :2thumbs:
next project 70 Charger FJ5 green

birdsandbees

1970 'Bird RM23UOA170163
1969 'Bee WM21H9A230241
1969 Dart Swinger LM23P9B190885
1967 Plymouth Barracuda Formula S
1966 Plymouth Satellite HP2 - 9941 original miles
1964 Dodge 440 62422504487

cdr

Thank you guys, took the car out to get some fuel, it was a nice drive, the wing gets way more attention than I thought it would.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

70 sublime

next project 70 Charger FJ5 green

billssuperbird