News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

do you guys think this will be a HUGE problem???????

Started by DoubleDlover, September 12, 2020, 08:31:33 PM

Previous topic - Next topic

DoubleDlover

Im sure some of you have had to deal with before. what do you think.  Super huge problem??  Or not to much???

DoubleDlover


JB400

I was told, if you don't take care of your toys, you won't have any to play with.

Challenger340

Nope.... run a stud and fuggetabootit.... common problem

We used to also grind a flat area on the Block there where the stud stick through..... and use a hardened washer just for 'some' retention with Locktite.... but not huge clampload req'd
Only wimps wear Bowties !

DoubleDlover

challenger340  Thank you for your input. I heard it wasnt out of the ordinary to have that happen. I also though a nut and bolt with large washer would be ok. Im also thinking about getting a peice from another block and muggy welding it back on. r

Rolling_Thunder

Common issue....      I've seen them welded up before and re-drilled...   
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip