|
C500
|
 |
« on: April 08, 2022, 02:07:15 PM » |
|
There are 4 holes in the roof, but only 2 are for the dome light… which 2 are the ones too use? And which way does the light fit - with the bulb socket facing the front or the back of the car? Pics would be great if you have em!!!
|
|
|
|
|
Logged
|
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."
"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
|
|
|
|
70 sublime
|
 |
« Reply #1 on: April 08, 2022, 05:35:47 PM » |
|
|
|
|
|
|
Logged
|
current project 69 Charger Daytona clone F6 green
next project 70 Charger FJ5 green
|
|
|
|
C500
|
|
« Reply #2 on: April 08, 2022, 06:03:06 PM » |
|
Thanks for the link, give the orientation of the light, still need to know which 2 of the 4 screws to attach it to |
|
|
|
|
Logged
|
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."
"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
|
|
|
Texasdoc
New Member
 Offline
Posts: 20
|
|
« Reply #3 on: April 09, 2022, 02:48:41 PM » |
|
my bulb faces forward.
The lens tabs are in line with the car front to rear.
|
|
|
|
|
Logged
|
|
|
|
|
C500
|
|
« Reply #4 on: May 06, 2022, 10:45:01 PM » |
|
Anyone know if it dome light uses the two forward or rear screws in the roof?
|
|
|
|
|
Logged
|
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."
"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
|
|
|
RTSE440
Junior Member
Offline
Posts: 114
|
|
« Reply #5 on: May 07, 2022, 12:31:32 AM » |
|
Not sure if this helps may make it worse
|
|
|
|
Logged
|
|
|
|
|
C500
|
|
« Reply #6 on: May 07, 2022, 04:46:47 PM » |
|
Any tell which pair of holes were used
|
|
|
|
|
Logged
|
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."
"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
|
|
|
RTSE440
Junior Member
Offline
Posts: 114
|
|
« Reply #7 on: May 07, 2022, 09:23:08 PM » |
|
Sorry this was taken 7 years ago but i'm thinking the front 2 holes as the indent in the insulation from the light housing but that could also be the light housing pulling down. Sorry i couldn't help any further but i'll look next week at the car as it's at the paint shop and should be able to tell from the holes if they have a burr on them but no promises
|
|
|
|
|
Logged
|
|
|
|
RTSE440
Junior Member
Offline
Posts: 114
|
|
« Reply #8 on: May 23, 2022, 02:45:42 AM » |
|
Sorry c500 took a look today and couldn't tell from the holes which ones
|
|
|
|
|
Logged
|
|
|
|
|
C500
|
|
« Reply #9 on: May 23, 2022, 06:11:48 PM » |
|
Sorry c500 took a look today and couldn't tell from the holes which ones
Thanks, all sorted, headliner is now in, and dome light in place |
|
|
|
|
Logged
|
"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."
"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."
|
|
|
RTSE440
Junior Member
Offline
Posts: 114
|
|
« Reply #10 on: May 24, 2022, 04:08:15 AM » |
|
Which holes did they use in the end
|
|
|
|
|
Logged
|
|
|
|
|
