News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1968 Antenna Kit Installation

Started by BrokenHero, March 01, 2021, 07:38:14 PM

Previous topic - Next topic

BrokenHero

Hey guys -

Just got this antenna kit from Year One

https://www.yearone.com/Product/chrysler-b-body/hr698

Does anyone know what exactly I need to remove to install it? Door? Fender? Can I install it without taking anything major off?

Also, I don't need it to be functional, because I've already installed a modern CD deck hooked up to 6 x 9's in the back. Should I just omit the black cable/wire or will I need to install it and have the cable go somewhere? Seems like there's some metal hardware attached to the cable that might be important.

If it seems complicated I might just have a local shop do it.

Thanks!

Ted

1968 Dodge Charger
383 4 barrel
PP1 red, black vinyl top
Los Angeles, CA

Alaskan_TA

It can be accessed by removing the rear splash shield behind the passenger side front tire.

Not a lot of room to work, but it can be done.

(doors and fenders were installed and final painted before antenna hardware was added at the factory)

BrokenHero

1968 Dodge Charger
383 4 barrel
PP1 red, black vinyl top
Los Angeles, CA