News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Ignition module / wiring setup advice needed

Started by C500, May 17, 2021, 05:26:56 PM

Previous topic - Next topic

C500

Hey gang... I'm after some electrical input for setting up my rebuilt 440 in the '69.

Here's what I have:

Hi-Rev 7500 ignition module
Firecore Electronic Distributor
New Mopar Voltage Regulator - Electronic Solid state
Ballast resistor

Any comments or advice on this setup welcome please...




"An aggressive exterior with power to match was enough to pull in the performance boys-especially when abetted by a pair of pipes blaring out the back, and brawny red-sidewall rubber hitting the pavement."  

"........the four speed box changes cogs with the precision of a sharp axe striking soft pine."

Canadian1968

What exactly are you asking ?  How to actually wire everything together ?

Just type in Mopar electronic ignition diagram into Google .

Or just search on this site