Gen III Hemi swaps and oil dipsticks

[TTSaleen]

So apparently when you Gen III hemi swap your B body, the oil pans available don't have a provision for the oil dipstick tube.
My Gen III 5.7 hemi came out of a 2006 Daytona R/T and is front sump with a dipstick on the passenger side front of engine.
The oil pan kits I see available for my 68 Charger are the Holley and Weiand models for center sump.
Neither have oil dipstick provisions but say to use the one for the block.

I looked and my block appears to have them blocked off.
So for anyone that has done this, is there an oil pan you recommend or did you simply get a dipstick and tube and figure out how to punch out the factory sealed holes in the block and use that provision (which I think was for the truck engines)?

Thanks for the help.
Ryan

[Lennard]

I use a Milodon pan and dipstick. Just knock out the plug on the left side of the block.

Lots of information here:

https://www.facebook.com/groups/750056585062561/?ref=share

https://www.facebook.com/groups/1683856088414570/?ref=share

[TTSaleen]

Thanks.  But I'm not on facebook so I cannot see any of those posts.

[Lennard]

Thanks.  But I'm not on facebook so I cannot see any of those posts.

I wasn't on Fakebook either until I needed information for my hellcat swap. Lots of info on there that I couldn't find anywhere else.
Are you on YouTube?

https://m.youtube.com/watch?v=5XKLqhMaxk8&feature=youtu.be

[TTSaleen]

Yes, quite active actually.  Haha.
I will get it figured out.  Appreciate the help.
Probably going with the Milodon 22065 flexible option since I will be using TTI long tube headers on my swap.
https://www.summitracing.com/parts/mil-22065#

[Lennard]

Yes, quite active actually.  Haha.
I will get it figured out.  Appreciate the help.
Probably going with the Milodon 22065 flexible option since I will be using TTI long tube headers on my swap.
https://www.summitracing.com/parts/mil-22065#

That's the dipstick I have. 

[TTSaleen]

I went with the Holley oil pan and the Milodon dipstick.
Here's my video on the swap.
https://youtu.be/up3U22lHAAg