News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Clutch push rod and fork ?

Started by Highbanked Hauler, September 03, 2021, 07:51:16 PM

Previous topic - Next topic

Highbanked Hauler

 Last year when I was putting the car together I put in a (rubber) stop into the clutch fork that the rod pushes against. With the car running the clutch pedal feels mushy. My question is, is there something else supposed to go into the clutch fork  to take the force of the rod pushing on it ?  :shruggy: thanks.
69 Charger 500, original owner  
68 Charger former parts car in process of rebuilding
92 Cummins Turbo Diesel
04 PT Cruiser

metallicareload99

I figured someone would have posted before me, but there should be a large "washer" backing up that rubber part, between the adjusting nut and the rubber part you're describing. Or are you looking for one of these:

https://www.ebay.com/itm/324721372589
If the link don't work search on ebay: Mopar Clutch Linkage Solid Steel Swivel  :drive:
1968, When Dinosaurs Ruled The Earth