News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Performance Mods 440 charger

Started by Christianlondon, November 03, 2021, 05:22:51 AM

Previous topic - Next topic

Christianlondon

I was looking at a couple of reasonably priced  performance Mods to add to my 69 440 Charger .I am thinking about getting the Edlebrock Performer Intake Manifold 440 and the
Holley Double Pumper..will this make much of a difference or is there some other option.

mally69

Whats ur expectations and current build gear ratio auto or man if auto what convertor?

Challenger340

You will need to provide a LOT more info on the Car/Engine in it's current state ?
from there....
I am sure suggestions can be forthcoming ?
Only wimps wear Bowties !

cdr

Quote from: Challenger340 on October 18, 2022, 10:22:22 PM
You will need to provide a LOT more info on the Car/Engine in it's current state ?
from there....
I am sure suggestions can be forthcoming ?

This ^^^^^ And budget
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr