Steve Mirabelli new project 68 Charger

[Stevearino]

https://www.youtube.com/watch?v=x29EJcXae-E&t=1s  More tedious nonsense.

[JB400]

Does the old Charger body reinforce the LX platform enough, or is there some noticeable chassis flex?

[70 sublime]

Almost like you have to build 2 or 3 of these conversions to have a good plan on how to do things 

[Stevearino]

Does the old Charger body reinforce the LX platform enough, or is there some noticeable chassis flex?

I added 2x4 frame rails so I am not depending on the body. I did not do this in my Daytona and yes there is flex but no more than an original Charger.

Almost like you have to build 2 or 3 of these conversions to have a good plan on how to do things 

It helps to have done one before but each one has unique challenges.



https://www.youtube.com/watch?v=WYxMYNyjkGw

More of my struggle.

[Stevearino]

https://www.youtube.com/watch?v=loiRsOdqVrQ   Completing the top dash closure.

[70 sublime]

With the dash so thick from the door post back will the original Charger window cranks be able to turn and not hit the dash pad or are you putting electric windows in ?

[Stevearino]

With the dash so thick from the door post back will the original Charger window cranks be able to turn and not hit the dash pad or are you putting electric windows in ?

They will be power windows.

[Stevearino]

https://www.youtube.com/watch?v=EqZ3D1UgUo4 Doors going on.

[Stevearino]

https://www.youtube.com/watch?v=H02AgU6s4MI  The saga continues.

[cdr]

as always I am amazed at you work !!!! 

[Stevearino]

as always I am amazed at you work !!!! 

Thank you Charlie . I am a big admirer of your efforts as well.

[Stevearino]

https://youtu.be/RIf4HtnTfdQ  Work on the doors continues.

[Stevearino]

Hit a bit of a bump in the road this week. https://www.youtube.com/watch?v=k8696tCWHME

[Stevearino]

It's a dang miracle. https://youtu.be/cTZllsO_wig

[Stevearino]

https://www.youtube.com/watch?v=sIxLzOmx1sc  More drival dravel.

[Stevearino]

https://www.youtube.com/watch?v=y4ZOwQy2CAI&t=4s  More bibbling and scribbling.

[Stevearino]

https://www.youtube.com/watch?v=MPKVAjvJVl0 The work continues.

[Stevearino]

https://www.youtube.com/watch?v=EnS3_l3zVW4 Bumper and Grill work.

[JB400]

https://bringatrailer.com/listing/2010-dodge-challenger-39/

[70 sublime]

https://bringatrailer.com/listing/2010-dodge-challenger-39/

Boy did that donnor car he built in on have a rough life

The Carfax report lists an accident in November 2011 that resulted in front-end damage after hitting a deer as well as damage to the left front in November 2013, and "moderate damage" in January 2017 to the front and right side of the vehicle along with fire damage. The Carfax report also notes that the car was deemed a "Total Loss" in April 2017.

[Stevearino]

https://bringatrailer.com/listing/2010-dodge-challenger-39/

Boy did that donnor car he built in on have a rough life

The Carfax report lists an accident in November 2011 that resulted in front-end damage after hitting a deer as well as damage to the left front in November 2013, and "moderate damage" in January 2017 to the front and right side of the vehicle along with fire damage. The Carfax report also notes that the car was deemed a "Total Loss" in April 2017.

Yes it did.

Anyways the saga continues with more tedious stuff         .https://www.youtube.com/watch?v=v_wluV79NSw

[Stevearino]

https://www.youtube.com/watch?v=k-mcE40NfvM

[Stevearino]

https://youtu.be/vW5HzrW_JxU more interior fab.

[Stevearino]

https://youtu.be/3C6wvhZsOtY the last of the interior bits fabricated and the fuel filler built.

[Stevearino]

https://youtu.be/Tf0sQd031MY.   A little wiring and some trunk lining.