DodgeCharger.com Forum
August 07, 2022, 03:20:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Door glass rear felt install  (Read 487 times)
chargernut69
New Member
*
Offline Offline

Posts: 37



« on: February 03, 2022, 05:22:12 PM »

Hello

Trying to figure out how to install the felt covered rubber strips ( felt on one side ) that go on the rear of the door glass metal channel on my ‘69 Charger.

Do they slide in the groove ?  Or is the edge pressed into the channel groove ?  I checked the posts around the web, but did not find any details….

Also, do they need weatherstrip adhesive on the non-flocked back side too ?

Thanks,
Jack



* 177FDCC9-BA3A-4FEB-8E8F-76985F985539.jpeg (131.52 KB, 640x480 - viewed 227 times.)

* 2D7CB95A-5312-465B-ADCA-F8E68CB10A95.jpeg (102.81 KB, 640x480 - viewed 218 times.)
Logged
panhead
Full Member
***
Offline Offline

Posts: 416



« Reply #1 on: February 03, 2022, 07:27:22 PM »

Good evening sir

Give this a look, I hope it helps

http://www.dodgecharger.com/forum/index.php/topic,136566.0.html

Curt
Logged

69' Dodge Charger 500
69' Dodge Daytona (clone)
chargernut69
New Member
*
Offline Offline

Posts: 37



« Reply #2 on: February 04, 2022, 12:39:20 PM »

Update...   

Best idea I came up with was to install the weatherstrip ( Metro VS 7-E/FL ) by first putting lower edge in the channel and then carefully pushing the top edge of it under the SS trim using a plastic trim tool.  Sliding it thru did not seem like a viable option....

I had to make sure that the soft rubber was covered by the tool first, before pushing it under the edge so it did not cut the rubber flock material.   Also went back and forth with tool pushing both up & down on the inside groove of the weatherstrip perpendicular to the SS trim.    Worked great.

Did not use any sealant on it, as it appeared to be holding onto the SS trim ok....  guess I will see when I put the windows in the doors.





* IMG_6138.jpg (107.36 KB, 640x480 - viewed 206 times.)

* IMG_6139.jpg (101.36 KB, 640x480 - viewed 199 times.)

* IMG_6140.jpg (101.39 KB, 640x480 - viewed 195 times.)
Logged
mopar4don
Old Timer
*****
Offline Offline

Posts: 1,207


« Reply #3 on: February 07, 2022, 06:02:49 AM »

Thanks, and please keep us updated. popcrn
Logged

INTMD8
Senior Member
****
Offline Offline

Posts: 547



« Reply #4 on: February 13, 2022, 02:56:49 AM »

Interesting. Do the top of your felts have a rubber cap? Mine did.   

I did the same as you but did use adhesive when installing. May or may not matter after install I closed the doors windows up and let them seat against the quarter windows for some time before attempting to roll the window up/down
Logged

69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.045 seconds with 17 queries.