October 04, 2022, 04:18:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: decals are available here!
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
Author Topic: window felt install  (Read 593 times)
Junior Member
Offline Offline

Posts: 61

« on: May 11, 2022, 08:23:34 PM »

can anyone give me installation tips to install the outer and inner window seals? i removed the outer seal with pliers and see how the replacements are supposed to mount hut I cannot get the clips into the mounting holes, am I supposed to remove the window? with the window rolled down it does not allow much maneuverability of the window sweep or the felt side, how are these installed? I purchased these from Softseal, the rear windows were easy to install, I thought of using a putty knife to no avail.

70 Charger R/T 440C.I 727 3.23's
Senior Member
Offline Offline

Posts: 933

Triple Tan. T3 T3 C6T

« Reply #1 on: May 19, 2022, 12:58:01 AM »

Yes, at minimum the glass has to be removed.  Good luck.

Mopar forever!
Old Timer
Offline Offline

Posts: 3,646

Ontario, Canada

« Reply #2 on: June 03, 2022, 05:51:29 PM »

I've done them with window as is... but if you can't get'm in, remove the door panel and the window down stop.... so you can lower it some more then reinstall the stop when done. No need to remove the glass...

1970 'Bird RM23UOA170163
1969 'Bee WM21H9A230241
1969 Dart Swinger LM23P9B190885
1966 Plymouth Satellite HP2 - 9941 original miles
1964 Dodge 440 62422504487
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.065 seconds with 18 queries.