DodgeCharger.com Forum
December 05, 2022, 02:53:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Edelbrock Performer RPM hood clearance  (Read 324 times)
375instroke
Old Timer
*****
Offline Offline

Posts: 1,192

'69 Charger R/T black, '69 Charger 383 Cordovan


« on: August 21, 2022, 06:32:46 PM »

I guess too many variables to get a definitive answer.  Here's my attempt.  I put a bigger and bigger wad of tape on the stock intake 440 with unsilenced air cleaner, and closed the hood until it just touched the tape.  That was at 2".  The front of the air cleaner was 9" above the front valley pan rail.  The motor I'm putting in the other '69 Charger is a 383.  Don't know the height difference.  With a Performer RPM, Holley Sniper EFI, 1" drop base, 2-3/4" filter element and unsilenced air cleaner, I get 10-1/4" from front valley pan rail to top of air cleaner, leaving 3/4" clearance, plus the height difference between the 383 and 440.  What have been your guy's results?
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.039 seconds with 17 queries.