News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Anyone use 440 Source rods?

Started by b5blue, September 07, 2022, 08:53:26 AM

Previous topic - Next topic

b5blue

440 Source connecting rods? Look to be a nice option?  :shruggy:

cdr

Quote from: b5blue on September 07, 2022, 08:53:26 AM
440 Source connecting rods? Look to be a nice option?  :shruggy:

I have the Platinum ones in my junker, so far so good
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

b5blue

Nice! (Thanks) I was looking at the forged steel ones though.  :scratchchin:

cdr

Quote from: b5blue on September 07, 2022, 11:15:27 AM
Nice! (Thanks) I was looking at the forged steel ones though.  :scratchchin:

I have heard that those are good for a mild build, the 1st ones they came out with were not so good, but I have see post on these that are good
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

b5blue