News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

front bumper help please

Started by 69maritime, September 03, 2005, 08:00:54 PM

Previous topic - Next topic

69maritime

I am in the process of putting my fenders, grill and bumper back on.  This is the first time I have done this.  The problem I have right now is that the holes in my bumper do not line up with holes on the Brace.  Is their a trick to maybe adjusting the brace to line up with the bumper?  I have tried anything yet, any suggestions?

8WHEELER

I would try leaving the bumper brace bolts a little loose to see if that helps getting
your bumper bolts lined up, it has worked for me.

Dan
74 Dart Sport 360, just for added fun.

mopar_madman

 :iagree: Leave as much loose as you can, there is adjutment room in it. Once you get it together I use a couple of floor jacks on either side of the bumper to get it level then tighten the brackets, check and readjust as needed.
1973 Dodge Charger
1968 Plymouth Road Runner
1971 Dodge Dart Swinger

Drop Top

 :iagree: Do this everytime you bolt on any part.