DodgeCharger.com Forum
October 04, 2022, 05:05:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: 1 2 [3]  All   Go Down
  Print  
Author Topic: Stainless Steel Trim Fasteners - '68 - '70 Charger  (Read 39597 times)
BLK 68 R/T
Old Timer
*****
Offline Offline

Posts: 1,619


68 Charger R/T, 493 stroker engine, 727 auto.


« Reply #50 on: April 03, 2017, 04:11:57 PM »

Where can I get these ASAP?Huh

 All the spring clips are 3/4" wide
Red 7/8,  yellow 13/16, black 11/16,  Brown 5/8, green 9/16
I hope this helps
Pat




Try here:
http://www.restorationspecialties.com/
Logged
Shmity1
New Member
*
Offline Offline

Posts: 40


« Reply #51 on: July 07, 2017, 09:00:13 AM »


Upper Door Trim clips

Good place to find these?

Thanks
Logged
hemiron1
Junior Member
**
Offline Offline

Posts: 50


« Reply #52 on: August 30, 2017, 07:11:28 PM »

Where can I get these ASAP?Huh

 All the spring clips are 3/4" wide
Red 7/8,  yellow 13/16, black 11/16,  Brown 5/8, green 9/16
I hope this helps
Pat



Did anyone have any luck finding these clips?
Logged
green69rt
Old Timer
*****
Offline Offline

Posts: 3,630


Current status


« Reply #53 on: October 30, 2017, 10:30:54 AM »

Here are pictures of the pieces.

Does anyone know, or can someone check on their cars for me?

Thank you!





I'm late to the show on this but just wanted to add the screws for this trim.  Also fit the wheel well trim. From Rock Auto....
https://www.rockauto.com/en/moreinfo.php?pk=586350&jsn=1
Logged

mopar4don
Old Timer
*****
Offline Offline

Posts: 1,220


« Reply #54 on: January 15, 2018, 11:33:25 AM »


 All the spring clips are 3/4" wide
Red 7/8,  yellow 13/16, black 11/16,  Brown 5/8, green 9/16
I hope this helps
Pat





Did anyone find a supplier for these door trim clips?
Logged

kent
Full Member
***
Offline Offline

Posts: 460



« Reply #55 on: December 06, 2018, 11:30:59 AM »

Any luck on finding those two retainer clips that are held by those little nuts for the rear of the door trim? One per side. I have been scouring the net all morning. AMK come close but not close enough.  Might just have to make something up???
Logged

Kent
kent
Full Member
***
Offline Offline

Posts: 460



« Reply #56 on: December 09, 2018, 06:36:55 PM »

Took me abit, but I found some. See if they have any in stock.
Logged

Kent
hemiron1
Junior Member
**
Offline Offline

Posts: 50


« Reply #57 on: December 09, 2018, 06:41:28 PM »

I had no luck at all. I made a few but when I used them I put dimples in the stainless....  more work!
Logged
BLK 68 R/T
Old Timer
*****
Offline Offline

Posts: 1,619


68 Charger R/T, 493 stroker engine, 727 auto.


« Reply #58 on: April 06, 2019, 09:52:51 AM »

Posting a link to the long J nuts that hold the rear quarter stainless trim. Credit goes to ChargerRT69 for the link  2thumbs
B-BODY QTR PANEL BELT TRIM LONG J CLIP
SOLD AS A SET OF 8 CLIPS AND SCREWS
http://www.rtspecialties.net/proddetail.asp?prod=6026552
Discussion around the clips as well.
http://www.dodgecharger.com/forum/index.php/topic,132042.0.html
Logged
ChargerRT69
Junior Member
**
Offline Offline

Posts: 80


'69 Charger R/T


« Reply #59 on: December 30, 2019, 11:22:25 AM »

Thanks BLK 68 R/T!

Hope it helps someone out!

Posting a link to the long J nuts that hold the rear quarter stainless trim. Credit goes to ChargerRT69 for the link  2thumbs
B-BODY QTR PANEL BELT TRIM LONG J CLIP
SOLD AS A SET OF 8 CLIPS AND SCREWS
http://www.rtspecialties.net/proddetail.asp?prod=6026552
Discussion around the clips as well.
http://www.dodgecharger.com/forum/index.php/topic,132042.0.html
Logged
Pages: 1 2 [3]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.056 seconds with 17 queries.