DodgeCharger.com Forum
June 17, 2019, 09:15:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: rear leaf spring length?  (Read 1611 times)
jackel440
Full Member
***
Offline Offline

Posts: 258



« on: July 23, 2005, 10:59:39 PM »

two yrs ago i put new springs on my 72 (used off a who knows what maybe 69 rr)well i have noticed that since i repainted my car last yr and really noticed with my new wheels and tires that my wheel centerline is farther back in the wheel well opening.well i was under it doing some work and noticed that my shocks are leaning forward and that makes me sure the locating pin is farther back than on the old springs.i would check the old ones but they seem to be long gone Undecided
well i guess what i am wondering is if i can get new springs that will relocate my axle in the wheel well .like the super stock springs?I haven't done any research on this yet but i thought all the b body had the same length springs and locating pins the same distance from the front spring eye.thanks for any help  Smiley
Logged
Chryco Psycho
Global Moderator
Old Timer
*****
Offline Offline

Posts: 5,763


www.panamaroadrunner.com


WWW
« Reply #1 on: July 24, 2005, 12:07:52 AM »

are you still using the stock front mounts Huh

 stock B7E body springs are 22 " front the center of the front eye to the Center bolt , A body are 20" , not sure what diamentions C bodys might have
Logged
jackel440
Full Member
***
Offline Offline

Posts: 258



« Reply #2 on: July 24, 2005, 01:11:12 AM »

yep still have the stock front mounts.I'll have to measure the springs to see what they are tomorrow.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.056 seconds with 16 queries.