DodgeCharger.com Forum
October 01, 2022, 11:43:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: floor consol light  (Read 1452 times)
280bb0
Junior Member
**
Offline Offline

Posts: 86


« on: November 04, 2007, 10:30:34 AM »

Just got my automatic floor shift installed and finally got the light and wire for it. where under the dash does it plug in Help!!
1972 hard top   Thanks
Logged
Nacho-RT74
Old Timer
*****
Offline Offline

Posts: 19,512


Tired of everything


« Reply #1 on: November 04, 2007, 10:33:28 AM »

you must have a LOOONG wire running from A/C control side/area, plugged on an orange source with bullet kind throught all the dash frame up to passenger side kick panel, and then from there with spade terminal the last wire section up to center console.
Logged

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Nacho-RT74
Old Timer
*****
Offline Offline

Posts: 19,512


Tired of everything


« Reply #2 on: November 04, 2007, 10:40:53 AM »

look at these pics:



the orange source is located around the wiring metallic black hook or "strap"
Logged

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
280bb0
Junior Member
**
Offline Offline

Posts: 86


« Reply #3 on: November 07, 2007, 09:10:40 AM »

Thanks Nacho I will look at it today Im hoping that all I have to do is find that connector near the kick pannel. what are your thoughts on that were the cars prewired for either consol shift or colum.
Logged
Nacho-RT74
Old Timer
*****
Offline Offline

Posts: 19,512


Tired of everything


« Reply #4 on: November 07, 2007, 01:10:55 PM »

eeehm... if you car was column shifter, don't think you'll have the first wire from the lighning source up to kick panel area. That's a separated wire from the main harness. Main harness provid eteh source to all cars, but not from there up to the rest... all depends of options.
Logged

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
280bb0
Junior Member
**
Offline Offline

Posts: 86


« Reply #5 on: November 07, 2007, 05:49:25 PM »

Couldnt find the wire at the kick panel any thoughts ??
Logged
Nacho-RT74
Old Timer
*****
Offline Offline

Posts: 19,512


Tired of everything


« Reply #6 on: November 07, 2007, 06:04:15 PM »

SIMPLY... just need to run a wire from source ( bullet terminal ) up to kick panel ( spade terminal )
Logged

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
280bb0
Junior Member
**
Offline Offline

Posts: 86


« Reply #7 on: November 07, 2007, 08:13:45 PM »

Ok looks like 18 gage wire. I hill have to try and match each end hope the auto store will have them.  Thanks for your help!!!
Logged
Nacho-RT74
Old Timer
*****
Offline Offline

Posts: 19,512


Tired of everything


« Reply #8 on: November 07, 2007, 09:22:40 PM »

yeah, is 18, same as the section you apparently have with socket and male terminal to teh floor section
Logged

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.064 seconds with 18 queries.