DodgeCharger.com Forum
December 04, 2022, 12:29:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: '69 Grill Alignment  (Read 501 times)
Dano 1
Full Member
***
Offline Offline

Posts: 248



« on: January 18, 2022, 07:29:40 AM »

I'm in the process of restoring the grill for my '69 and did a quick test fit in the car last night. I noticed the grill sits about 3/4"-1" behind the front edge of the hood/fenders which didn't seem quite right. When I bought the car the grill was assembled but not in the car so I have never seen everything together.
Any other '69 owners have some insight or pics of where the grill is supposed to sit relative to the hood/fenders? The grill support is bolted in the car and the grill center section was located with all of the bolt/clips finger tight, the pics are with it pulled all the way forward in the adjustment slots.



Logged

1969 Charger 383 2bbl, R4 red, White hat special project

Check out my website for 3D printed restoration parts and accessories.
www.nextgendesignsnc.com
BadA55charger
New Member
*
Offline Offline

Posts: 17



« Reply #1 on: February 01, 2022, 11:54:40 PM »

If Iím correct, it should be the same as a 68 Grille to body mounting.   My Ď68 seems to be the same as what you are describing.  I notice the grille curve from the ends is sharper and go deeper in than the fender curve.  I guess it is an intended design.    :shruggy:r


* DE0CD76D-4198-4536-8733-1F47955037E8.jpeg (49.66 KB, 399x299 - viewed 204 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.047 seconds with 18 queries.