News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

edelbrock headed 440

Started by daytonakid, January 13, 2008, 12:44:30 PM

Previous topic - Next topic

daytonakid

 440 .040 over speed pro 6 pack pistons, stock edelbrock heads, mopar 509 cam, stock edelbrock performer rpm, AED 850 holley, fenderwell headers, in a 3250 pound car ran best of 11.06 @ 117mph with 1.48 60' shifting at 5800. Been running at track for 3 years. Just pulled out will put it in my b body convert. Built new 500 with indy ez-1 heads. Will have on track this year.
Owner East Portland Auto Body www.eastportlandautobody.com

joflaig

What gears and rear suspension are you running? Any idea on HP/torque #s?

daytonakid

Running a 4.56 dana 28x 10.5 tires 3500 stall and 727 with a gear vendors overdrive. Never dyno'd it but from conversions should be 500 to 550 hp. Bill
Owner East Portland Auto Body www.eastportlandautobody.com

joflaig

Quote from: daytonakid on January 17, 2008, 01:44:06 AM
Running a 4.56 dana 28x 10.5 tires 3500 stall and 727 with a gear vendors overdrive. Never dyno'd it but from conversions should be 500 to 550 hp. Bill

Nice. No subframe connectors or traction bar type setup?

daytonakid

Frame connectors and cal tracs.
Owner East Portland Auto Body www.eastportlandautobody.com