News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

DAYTONA CLONE IN TEXAS

Started by cdr, June 12, 2013, 03:45:20 PM

Previous topic - Next topic

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

JB400

Looks like quite the project.  I can tell the nose is glass, but I couldn't tell if the wing was or not.   :popcrn:

tan top

 not expert on datona clone conversions  , but the actual conversion of adding the daytona stuff only   , looks like its been done pretty  good from the pictures   :yesnod:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

tan top

 :popcrn:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

Stevearino

I like the clever use of a window regulator and window motor to drive the headlight doors. This is a really good starting point  for someone. Not a lot of strenuous stuff to be done.

Nwcharger

I wouldn't pay that much without a title. Not a bad looking car though.
1969 coronet wagon

moparstuart

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

A383Wing

car was looking pretty good to me until I got to the frame rails & undercarriage

Bryan

Speedfreak

For someone looking to build one, this is an excellent start, depending on the price of course.  Would be nice to finish it off with a Hemi :2thumbs:

Mytur Binsdirti

A blue interior will really compliment the car.

WINGIN IT

Quote from: Mytur Binsdirti on June 13, 2013, 09:46:23 AM
A blue interior will really compliment the car.

Not if you paint the car orange... :lol:

Xenon

Here is the text from Lucas site....

"Selling this for a friend of mine: This is a 1970 dodge charger with the 69 daytona 500 back glass and the daytona front clip and rear wing.
This is a clone charger needing full restoration,very solid charger,comes with lots of parts. no engine,but we can sell you a hemi or a 440 ??
please call with questions and I will email more pictures to interested parties.
This car needs to be sold by the end of the month, the best offer over 25,000 will get the car."



Wasn't there a blue clone with a 318 that is a driving car selling for close to this amount year or so ago.... ?

cdr

Quote from: Xenon on June 13, 2013, 10:48:18 AM
Here is the text from Lucas site....

"Selling this for a friend of mine: This is a 1970 dodge charger with the 69 daytona 500 back glass and the daytona front clip and rear wing.
This is a clone charger needing full restoration,very solid charger,comes with lots of parts. no engine,but we can sell you a hemi or a 440 ??
please call with questions and I will email more pictures to interested parties.
This car needs to be sold by the end of the month, the best offer over 25,000 will get the car."



Wasn't there a blue clone with a 318 that is a driving car selling for close to this amount year or so ago.... ?

looks like a vega rear glass.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

70moparman

Looks like a cool project...  Wish it was mine  :drool5:

BigBlockSam

hey . i tried to buy this car  along , long time ago . out of florida . it was in better shape back then . they never said anything about rusted rails . if they did i wouldn't have tries so hard to buy it . that scares me . i remember the wing was sagging in the middle too . i think at 9-10k its a good start for someone . :cheers: :cheers:
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

petercharger

You know I would say around 12 to 15.  Try buying all the Daytona clone products, then finding a 70 charger to make the conversion easier, and then pay yourself min wage for your time putting it to this point.  I would say it be closer
Too 15k....less the fram rails...    :Twocents:
best way to get a hold of me is brushcollege@msn.com...thanks

BigBlockSam

i would say that if it wasn't for the frame rail replacement
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

rob-dirt

Same Car was Sold Off Moparts in May Hers The ADD 
Sold!! Thanks for the ad Moparts!



Janek parts on a 1970 B-5 in and out Charger. Originally was a 318 column auto with ps, pb, and a/c. Has buddy seat. From Nevada and is pretty solid. Electric headlights with steel rear window installed along with wing, brackets, nose cone, fender scoops, etc.. I have lots of new parts to go with this project, I just don't have time to do it. $19,500 with new seat covers, door panels, and lots of extra parts. Located in Florida panhandle. Will trade for car that doesn't need to be restored.