DodgeCharger.com Forum
December 03, 2022, 02:25:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Superbird Hold Down Plate Reproduction  (Read 1661 times)
1970 RT/SE
Junior Member
**
Offline Offline

Posts: 86


« on: March 20, 2008, 04:27:09 PM »

I had the superbird jack hold down plate reproduced copied from my original. It has not been availible for several years. I had a small run made as they were more expensive to do this time as the firts shop that did them no longer has the press. They are die stamped like the originals and are stamped with two different dies as they have an upper and lower relief.I also had them powder coated so they will hold up nicely. The price will be 150.00 plus shipping. Contact me at the below listed email or phone number.My original is on the right
Mike 860 424-6125
gilead222@comcast.net


* r1502.jpg (21.36 KB, 350x262 - viewed 413 times.)

* r1503.jpg (20.83 KB, 350x262 - viewed 397 times.)

* r1504.jpg (20.17 KB, 350x262 - viewed 397 times.)

* r1505.jpg (22.63 KB, 350x262 - viewed 415 times.)
Logged
BigBlockSam
Old Timer
*****
Offline Offline

Posts: 8,036



« Reply #1 on: March 20, 2008, 07:28:50 PM »

thats a lot differant then the daytona one . Rene
Logged

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img
1970 RT/SE
Junior Member
**
Offline Offline

Posts: 86


« Reply #2 on: March 21, 2008, 05:17:35 AM »

Yes it is, never could understand why they changed as the Superbird one is such intricate piece of work.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.043 seconds with 17 queries.