News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

i need a measurement, from a daytona wing

Started by BigBlockSam, October 13, 2005, 10:21:43 PM

Previous topic - Next topic

BigBlockSam

hey guys i have two daytona aluminum wings, i plan on building another one when i finish this one . a radical one . prostreet and low, how low can you go.
but the horizontal
part of my wings are differant lengths. i was told that they are made alittle longer than stock. cause there is shinkage in the casting process. can someone please measure there's on there daytona. just the center peice, without the uprights. thanks Rene
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img


BigBlockSam

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img