DodgeCharger.com Forum
January 27, 2023, 04:07:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Remove rear window regulators  (Read 1107 times)
six-tee-nine
Old Timer
*****
Offline Offline

Posts: 1,804


'69 R/T white - red stripe


« on: October 03, 2012, 10:35:46 AM »

Ok, dont start making fun of me but I cant seem to get the rear window regulators out.

They obviously dont go trough the square hole in the bottom of the inner quarter. I tried to get them out from the top but it gets stuck ervery way I try.
Do I need to pull them further apart or what am I missing here?

Yes the glass is out and so are the upper pads and all of the other misc parts.
Logged

Greetings from Belgium, the beer country

NOS is nice, turbo's are neat, but when it comes to Mopars, there's no need to cheat...

Back N Black
Old Timer
*****
Offline Offline

Posts: 3,797



« Reply #1 on: October 03, 2012, 12:10:02 PM »

yep, its a pain in the ass, you have to take all apart.
Logged
tan top
Old Timer
*****
Offline Offline

Posts: 32,682


69 - R/T SE - Y2-CRX-V1T-V88


« Reply #2 on: October 03, 2012, 02:21:22 PM »

yep, its a pain in the ass, you have to take all apart.

yeah !! icon_smile_blackeye  thats true !

when i done the resto on  mine ,
i took one look at the set up & thought ! no way am i going to remember all this , in 3 or 4 years time  Roll Eyes , (before digital cameras were all the rage too ) so what i done was assemble each side on thick cardboard ,  so  its like its actually in the car in correct location  , draw round all the bolts before you remove &  number them & do the same to the assembled winders on the cardboard
Logged

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
  http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
  http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
  http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
  http://www.dodgecharger.com/forum/index.php/topic,109484.0.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html
Mopar1979
Junior Member
**
Offline Offline

Posts: 122


69 Charger SE


« Reply #3 on: October 20, 2012, 05:52:27 PM »

I am in the same process right now. I have already given up today to try to figure out a better way. I cannot get a very good picture down in there. I wonder if the factory installed them before they welded the quarters on.
Logged
Indygenerallee
Old Timer
*****
Offline Offline

Posts: 3,302


Brazil, Indiana


« Reply #4 on: October 20, 2012, 07:30:18 PM »

I took mine out but I am replacing both full quarters and I will install them before the quarters go back on. I have a feeling they were installed before the quarter panels.
Logged

Sold my Charger unfortunately....never got it finished.
Mopar1979
Junior Member
**
Offline Offline

Posts: 122


69 Charger SE


« Reply #5 on: October 20, 2012, 07:40:03 PM »

What would be a good paint to look close to galvanize to use?
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.069 seconds with 18 queries.